Search
Register
Only Admins can see this message.
Data Transition still in progress. Some functionality may be limited until the process is complete.
Processing Attachment, Gallery - 164.93528%

Vintage Z Ride bought out of a barn for $25! Last viewed: 2 hours ago

Posts: 556 Threads: 39

For what it's worth...the cymbal's center hole will probably not accomodate most modern cymbal stands.

Posted on 13 years ago
#11
Posts: 2444 Threads: 288

From [email protected]

23" diameter across the bottom side.Any techniques for mounting it in a way to keep the keyhole from worsening?Right now I have the keyhole stuffed with a chunk of felt cut from a cymbal donut,and mounted to one of these spring absorbers....Maybe I should put some silly putty in that keyhole : )

23 inch ride is pretty rare, especially one of that age. That will definitely push up the value. Weight is a bit towards medium heavy. Use felts only, and as I was told by another member here, don't use top felt, let the cymbal move freely.

Its better to have people think you're an idiot, than to open your mouth and prove them wrong, unless you doubt yourself then speak away....
Posted on 13 years ago
#12
Posts: 6583 Threads: 644

I had a 25" Trans Stamp once.....def odd size....

"Always make sure your front bottom BD lugs clear the ground!"
Posted on 13 years ago
#13
Posts: 425 Threads: 20

Nice story and happy christmas!

Felt is fine, but stop the stem of the stand gnawing away in the cymbal, making the hole even larger.

Use those insulating pieces of hard plastic around the stem - or those long nuts that does the same. A wing nut is no good.

These, for instance:

http://www.steveweissmusic.com/product/1127971/cymbal-stand-parts

or these:

http://www.steveweissmusic.com/product/33554/cymbal-stand-parts

Enjoy your ride!

Jon

Posted on 13 years ago
#14
Posts: 6288 Threads: 375

What about a cymbal grommet to ease the pain?

Kevin
Posted on 13 years ago
#15
Posts: 766 Threads: 68

A beautiful Trans Stamp bought out of a barn...love it!!!

Clapping Happy2

http://www.classicvintagedrums.com
Posted on 13 years ago
#16
Posts: 6583 Threads: 644

I got a 20" Turk K from out in a barn in NZ sent once,replete with bird **** still on it!Toilet

"Always make sure your front bottom BD lugs clear the ground!"
Posted on 13 years ago
#17
Posts: 7 Threads: 1

..................................

Posted on 13 years ago
#18
Posts: 1322 Threads: 22

From [email protected]

23" diameter across the bottom side.Any techniques for mounting it in a way to keep the keyhole from worsening?Right now I have the keyhole stuffed with a chunk of felt cut from a cymbal donut,and mounted to one of these spring absorbers....Maybe I should put some silly putty in that keyhole : )

Keyholing is the result of metal on metal contact from the rod. If you're using plastic or rubber over the rod that is sufficient to prevent contact. I would clean it with mild soap and water and then just let it alone. Assuming no cracks at the edges or at the bell, play it as you would a new cymbal. However, remember that heavy hitters with big sticks can break even new cymbals. As to age, trans stamps were from the '40's to the early '50's. I have a 20" bop ride from the very early '50s which has a trans stamp. Even with the depressed value in this economy, its still worth quite a bit and at $25 its a steal. Surprised the guy sold it to you so cheaply especially since he was aware of the higher value of such things on eBay.

Mark
BosLover
Posted on 13 years ago
#19
Posts: 1322 Threads: 22

By the way, can you provide a decent sound clip? I'm sure we'd all love to hear it. Jump For Joy

Mark
BosLover
Posted on 13 years ago
#20
  • Share
  • Report
Action Another action
Something else here